Welcome

Packing Procedures

The purpose of this document is to outline the general procedures of PACK PLUS RELO.

Scope

The packaging company(according to Customer Purchase Order instructions and in full agreement ) shall use this document with the Packaging & Handling guidelines in the Technical Specifications of SACO CONTROLS INC. Customer.
The packaging company uses the type of packing suitable to fulfill the requirements of Sea, Air or Land transportation (Domestic or International).
Packaging should be done in such way, but not limited to the following objectives, that are the minimum to be observed and secured:

1. Storage instructions are supported fully
2. Handling is easy and flexible
3. Damage prevention of goods
4. All signs related to advertise the ways of handling the packages are clearly identify.
5. Use of quality materials and workmanship according to Industry standards.
6. Identification of parts and address of final destination are clearly printed.

Supervision and workmanship shall be in accordance with the Quality Assurance polices of PACKPLUS RELO. and its Customer. Quality packaging procedures should be assured fully during and throughout the operation

Receiving and Inspection

1. The PACK PLUS RELO product shall be visually inspected to ensure that no damage has occurred during transit.
2. Any material showing signs of damage, or foreign material or objects, shall be reported to PACK PLUS RELO. Quality Assurance immediately.
3. Depending on the size and weight of the material , the discharging shall be carried out by a forklift or crane.
4. Measures ensuring avoidance of scratches and damage to the equipment should be enforced.

Cleaning and Preservation

1. The boxes should be, as much as possible ,sealed and serve as isolating material to the equipment and components.
2. The product shall be enveloped within a Marvel seal or equivalent bag with desiccant placed within. The desiccant should absorb any moisture retained within.
3. No solvent or chemical of any kind shall be used during cleaning process that may damage the equipment & components.
4. The product shall be cleaned with an appropriate tool or material to remove any foreign object.

Packaging

1. The choice of the packing type and the requirement of particular protections depend on characteristics of the equipment and material to be packed, and its handling requirements.
2. All equipment and materials which may be damaged by moisture will be packed in airtight bags in which sufficient desiccant material (e.g. silica gel) is enclosed
3. Nails will be spiraled and driven from the wood to eliminate and diminish protrusions.
4. Special attention would be observed regarding of the Handling, Packaging & Shipping specifications of PACK PLUS RELO. customers.
5. Loose wire cables shall be nested and bundled to ensure minimum cubage.
6. The material shall be packed securely for shipment in the least possible bulk.

Documents, Identifications and Markings

1. Detailed packing lists shall be placed on each of the crates and/or boxes showing weight, dimensions and exact contents for each of the crates and/or boxes.
2. All crates shall be identified with the domestic / international marking instructions and symbols. Stenciling and banding and shall be 1.0 " high minimum.
3. Marking should include but be not limited to include: destination, return address, P.O. Number, handling instructions, Net and Gross weight and any special instructions.
4. Verify and assure that the instructions for shipping labeling & identification coincide with the technical specification instructions from PACK PLUS RELO. customers.